80W 1805–1920MHz GaN UAV Countermeasure Jammer Module

Technology: GaN

Frequency Range: 1.8GHz

Connector Type: SMA Female

Output Power: 80W

80W GaN signal jammer module, 1805–1920MHz, DC24–29V, max 10A, ≥40% efficiency, SMA female, high-speed sweep, -20~+65°C.

80W 1805–1920MHz GaN UAV Countermeasure Jammer Module

Technical Specifications

Parameter	Specification	Notes
Frequency range	1805–1920MHz	1.8GHz band
Output power	80W	GaN amplifier; efficiency ≥40%
Supply voltage	DC24V–29V	Nominal DC input
Current draw	10.0A max	At full output
Modulation source	Internal high-speed sweep source	No external sweep source needed
Analog scan speed	High-speed sweep	Exact scan rate not published
Input / output impedance	50Ω	Typical RF impedance; output VSWR ≤2.0; SMA female; built-in absorptive VSWR protection
Protection LEDs	Power switch, overvoltage, over-temperature	Visual status indicators
Operating temperature	-20~+65°C	Ensure airflow and heat sinking
Dimensions (L×W×H)	168.5×84.5×23mm	Approx.
Weight	0.55kg	Approx.
Base material	Not specified	Contact sales for material details

Product Details

This drone jammer module gives 80W RF output from 1805MHz to 1920MHz. It uses GaN amplification and a built-in high-speed sweep source. It is made for UAV countermeasure and RF signal shielding work.

80W 1805–1920MHz GaN UAV Countermeasure Jammer Module

What You Get

Compact housing, SMA female output, and simple switch control. Supply is DC24V–29V. Max current is 10.0A. Efficiency is ≥40%. Output VSWR is ≤2.0.

Control and Protection

Turn it on with +5V or a floating control pin. Ground the pin to turn it off. LEDs show power, overvoltage, and over-temperature. Built-in absorptive VSWR protection helps protect the amplifier.

Installation Notes

Use a matched 50Ω antenna. Add a good heat sink or airflow. The module works from -20°C to +65°C. Size is 168.5×84.5×23mm. Weight is about 0.55kg.

Typical Applications

UAV countermeasure, drone defense testing, RF signal shielding, and controlled interference in the 1.8GHz band.

Frequently Asked Questions

Q: What is this module used for?

A: It is designed for UAV countermeasure and RF signal shielding in the 1805–1920MHz band. Typical uses include drone defense testing and controlled interference systems that need an 80W GaN output.

Q: Does it need an external sweep source?

A: No. It has a built-in high-speed sweep source. You only need DC power, the control signal, and a suitable matched antenna.

Q: How do I turn it on or off?

A: Apply +5V or leave the control pin floating to turn it on. Ground the pin to turn it off. Use a stable DC24–29V supply.

Q: What protection features are included?

A: It includes built-in absorptive VSWR protection plus overvoltage and over-temperature LEDs. Keep the antenna matched and provide airflow, especially when running at 80W.