100W 2000–2200MHz GaN Analog Drone Interference Module

Technology: GaN

Frequency Range: 2.1GHz

Connector Type: SMA Female

Output Power: 100W

100W GaN analog interference module: 2000–2200MHz, DC24–29V, 12A max, built-in high-speed sweep, SMA female, VSWR protection, -20~+65°C, 0.55kg.

100W 2000–2200MHz GaN Analog Drone Interference Module

Technical Specifications

Parameter	Specification	Notes
Frequency range	2000–2200 MHz	Wideband 2.0–2.2 GHz coverage
Output power	100 W	Typical; VSWR ≤2.0; built-in absorptive VSWR protection
Supply voltage	DC 24–29 V	Regulated DC input
Current draw	12.0 A max	At maximum output
Modulation source	Built-in high-speed sweep source	Analog interference source
Analog scan speed	High-speed sweep	Exact rate not listed; confirm with supplier
Input / output impedance	50 Ω	RF output; SMA female connector
Protection LEDs	Power switch, overvoltage, over-temperature	Status indicators
Operating temperature	-20 to +65 °C	Use proper heatsink and airflow
Dimensions (L×W×H)	168.5 × 84.5 × 23 mm	Approx.
Weight	0.55 kg	Approx.
Base material	Not specified	Contact supplier for housing and PCB material details

Product Details

Overview

This 100 W GaN analog interference module covers 2000–2200 MHz. It combines a built-in high-speed sweep source with a compact RF power stage. It is made for OEM integration, not for casual plug-and-play use.

100W 2000–2200MHz GaN Analog Drone Interference Module

Key Performance

Typical output power is 100 W. Output VSWR is ≤2.0. The module runs on DC 24–29 V and draws up to 12.0 A. Efficiency is at least 40%. A built-in absorptive VSWR protection device helps guard the RF stage under mismatch.

Control and Monitoring

On/off control is simple: +5 V or floating means on; grounding means off. LEDs show power, overvoltage, and over-temperature status. The RF output uses an SMA female connector.

Mechanical and Thermal

The housing measures 168.5 × 84.5 × 23 mm and weighs about 0.55 kg. Operating temperature is -20 to +65 °C. Use a suitable heatsink, airflow, and 50 Ω cables rated for the power.

Integration Notes

The internal analog sweep source is described as high speed. Exact sweep rate should be confirmed with the supplier. Check local radio rules before use. This 100W GaN interference module is intended for authorized testing, protected sites, or lawful OEM projects only.

Frequently Asked Questions

Q: What frequency and power does it cover?

A: It covers 2000–2200 MHz with 100 W typical output. It runs on DC 24–29 V and draws up to 12.0 A. Output VSWR is ≤2.0.

Q: How do I turn the module on and off?

A: Apply +5 V or leave the control pin floating to turn it on. Ground the control pin to turn it off. LEDs show power, overvoltage, and over-temperature status.

Q: Does it have VSWR protection?

A: Yes. It has a built-in absorptive VSWR protection device. The specified output VSWR is ≤2.0. Still use a proper 50 Ω load and rated cables.

Q: Can I use it in any country or application?

A: No. Radio interference rules vary by country. Use it only in authorized, lawful applications, such as approved testing or protected-site deployment. Check local regulations first.