60W GaN Drone Jammer Module 400-470MHz

Technology: GaN

Frequency Range: 900MHz

Connector Type: SMA Female

Output Power: 60W

60W GaN RF module for 400-470MHz drone countermeasures. DC12-14V, 13A max, built-in high-speed sweep source, SMA female, 138×50.5×17mm, 0.22kg.

Technical Specifications

Parameter	Specification	Notes
Frequency range	400-470 MHz	Wideband UHF coverage
Output power	60 W	GaN RF output
Supply voltage	DC 12-14 V	Regulated supply recommended
Current draw	13 A max	At rated operation
Modulation source	Built-in high-speed sweep source	Internal interference source
Analog scan speed	High-speed sweep	Exact rate not listed; confirm with supplier
Input / output impedance	50 Ω	SMA female output
Protection LEDs	Power, overvoltage, overtemperature	LED indicators
Operating temperature	-20 to +65°C	Use adequate cooling
Dimensions (L×W×H)	138 × 50.5 × 17 mm	Compact chassis
Weight	0.22 kg	Module only
Base material	GaN (gallium nitride)	RF power stage

Product Details

Built for UHF Countermeasure Work

This module covers 400-470 MHz and delivers 60 W RF output. It is made for UAV countermeasure, signal shielding, and authorized RF interference projects. The GaN amplifier stage helps keep the size small while supporting high output.

60W GaN Drone Jammer Module 400-470MHz

Key Specs at a Glance

Supply is DC 12-14 V. Maximum current draw is 13 A. Efficiency is ≥40%. Output VSWR is ≤2.0. The RF output uses an SMA female connector. A built-in high-speed sweep source handles modulation, so a basic setup does not need an external sweep generator.

Control and Protection

Switch control is simple: +5 V or floating means on; ground means off. LEDs show power, overvoltage, and overtemperature status. The module works from -20°C to +65°C. Keep it within the rated voltage and current range.

Mechanical Notes

The 60W GaN drone jammer module measures 138 × 50.5 × 17 mm and weighs 0.22 kg. It fits tight enclosures, but the 60 W output still needs a solid thermal path. Mount it to a metal surface or heatsink, and leave room for airflow.

Before You Use It

Check local rules. RF countermeasure equipment is regulated in many countries. Use it only in authorized environments. Match antennas properly. Poor VSWR can reduce range, increase heat, and stress the amplifier.

Frequently Asked Questions

Q: What is the frequency range of this module?

A: It covers 400-470 MHz. That makes it suitable for UHF control links and similar drone countermeasure setups where wideband coverage is needed.

Q: How much power does it output?

A: The module delivers 60 W RF output. It runs from DC 12-14 V and draws up to 13 A. Efficiency is at least 40%, so plan for heat management.

Q: How do I turn it on and off?

A: Apply +5 V or leave the control pin floating to turn it on. Ground the pin to turn it off. Use a clean control signal and confirm wiring before power-up.

Q: What should I know about cooling and protection?

A: It has LEDs for power, overvoltage, and overtemperature. Operating temperature is -20 to +65°C. Use a suitable heatsink and stable DC supply; do not block airflow.