2300–2500MHz 50W GaN Module for Drone Countermeasure and Signal Shielding

This module covers the 2300–2500MHz band and delivers 50W output. It uses AB-class GaN-on-SiC devices on a copper heatsink. The design is compact, rugged, and built for stable RF performance in signal shielding and authorized drone countermeasure systems.

What It Does

It provides instant wideband coverage with a built-in high-speed noise modulation source. The 50 Ohm input/output and SMA female connector make integration straightforward. LED indicators show power, over-voltage, and over-temperature status.

Key Specs at a Glance

• 2300–2500MHz frequency range

• 50W output, 47±1dBm

• 28V supply, 24–28V accepted

• Current draw: ≤3.2–4.5A at full output

• Analog scan speed: 270kHz standard

• Compact size: 117×58×18mm

• Light weight: about 300g

Power, Control, and Heat

The 50W GaN drone jammer module runs on 28V nominal and draws up to 4.5A at 50W output. GaN-on-SiC dies sit on a copper base for heat spread. Operating temperature is -20 to +65°C. The AB-class layout helps keep linearity and broadband behavior in check.

Custom Options

Need a different setup? The scan speed can be customized from 100–500kHz. The signal source can also be changed to VCO, DDS, or SDR. Dimensions can be customized as well. This makes the module easier to fit into different RF systems.

Before You Use It

Check local rules before deploying any RF countermeasure or signal shielding equipment. Use only where authorized.